What Is Recycled Wool, and How Does It Perform?

Table of Contents

Recycled wool is made by recovering wool fibres from existing textiles and using them in new products. It gives manufacturers another source of wool for sweaters, coats, scarves, and blankets, while making use of material that might otherwise be discarded.

How the new fabric feels and wears starts with the material being recovered. A fine-wool production offcut, a coarse old coat, and a wool-blend sweater provide different starting materials. Their fibre thickness and the length left after recycling influence the softness, yarn construction, and uses of the new textile.

What Is Recycled Wool?

The wool can come from manufacturing leftovers, such as fabric offcuts, or from garments collected after use. These sources are known as pre-consumer and post-consumer materials.

“Recycled” describes the wool’s processing history: its fibres have been recovered from an existing material for another use. This distinguishes it from virgin wool, which has not previously been spun into yarn, felted, or incorporated into a finished product.

When the source is a used garment, what happens next determines whether it is reused or recycled. Selling or donating a sweater keeps the garment intact for another person to wear. Fibre recycling takes the material apart so it can become new yarn and fabric.

Those recovered fibres may be used on their own or blended with virgin wool or other fibres. A recycled wool product can therefore contain both recycled and newly produced material, including fibres other than wool.

The environmental benefit starts with replacing some newly produced wool. Recovering an existing textile avoids the need to repeat its entire journey from sheep farming to usable fibre. Colour-sorted material can also be blended into new shades without another dyeing stage, saving the resources that redyeing would require.

Making recovered fibre into a sweater still requires spinning, knitting, and finishing, followed by washing and other care during use. These stages can account for much of a recycled wool sweater’s environmental impact, so its construction and how long it is worn also matter.

How Does Old Wool Become New Fabric?

Mechanical recycling is an established route for making new clothing yarn from wool textiles. Materials are sorted by composition, colour, and quality, then stripped of unwanted parts such as zips, buttons, linings, and incompatible sections.

Worker cutting unwanted components from a used garment before wool recycling.
Source: Manteco.

The textiles are cut and mechanically pulled apart into loose fibres. Some fibres break during opening, so the recycler needs to release them without unnecessarily reducing their usable length. The process required for a tightly constructed fabric differs from that needed for loose production remnants.

Worker handling loose fibres beside wool-recycling machinery.
Source: Manteco.

Recovered fibres are blended, carded, and spun into yarn, sometimes with virgin wool or other fibres added to achieve the required properties. The yarn is knitted or woven into fabric and finished for its intended use. Where colours have been carefully sorted, mixing existing shades can replace dyeing the new yarn or fabric.

There are other routes, too. Suitable knitwear can be unravelled to recover yarn without first shredding it into fibres, although seams, felting, and deterioration can make this difficult. Chemical approaches dissolve wool’s keratin protein and form new materials from it; fibre-to-fibre versions have been demonstrated at pilot scale.

How Does Recycling Affect Wool’s Softness, Warmth, and Durability?

Softness and Skin Comfort

Softness starts with the grade of wool being recovered. Fine fibres bend readily against the skin, while coarser, stiffer fibres are more likely to feel prickly. Selecting fine-wool material for recycling helps preserve the qualities wanted in a scarf or next-to-skin sweater; processing coarse wool does not turn it into a fine grade.

Even two garments labelled pure new wool can provide very different fibres: two source garments measured for recycling had average fibre diameters of about 20 and 39 microns. The thicker fibres were almost twice the diameter of the finer ones. Sorting only by the word “wool” would miss that difference, which is why recyclers also sort by quality.

Fabric finishing affects how that wool feels, too. Brushing creates a fluffy surface, but fibres that feel soft when stroked with a hand can still prickle against the neck. For close-fitting clothing, the recovered wool’s grade matters alongside the surface finish.

Warmth

Shorter recovered fibres can still be made into warm fabrics. For sweaters and woven coats, mills can use woollen spinning, a system that accommodates shorter fibres and produces bulky yarns. Spaces within the yarn hold insulating air, making this a useful way to turn recovered wool into winter clothing.

Fibres too short for clothing yarn can also become jacket filling. They are formed into a web instead of being spun, with other fibres sometimes added to help it retain its shape. For example, Re:Wool insulation combines 80% recovered wool with 20% polylactic acid (PLA) fibre to stabilise the filling.

Hands holding a soft white fibrous insulation layer.

The supplier lists insulation values of 1.5 clo for its 60 g/m² filling and 2.0 clo for its 100 g/m² version. Clo measures thermal insulation: the higher figure means greater insulation. Within this product range, the heavier filling provides more insulation while keeping the same fibre blend. These values describe the filling layer; the finished jacket’s warmth also depends on how that layer is incorporated into the garment.

Strength and Durability

Recycling can shorten a wool fibre while leaving much of its strength intact. Tests on mechanically recycled wool and cashmere knitwear found that the recovered fibres retained approximately 92% or more of their original tensile strength after a recycling pass.

Making a strong yarn also requires those fibres to stay together under tension. Shorter fibres have less length held within the yarn, so the spinner adjusts its twist and blend to achieve the cohesion needed for manufacturing and wear. Adding virgin wool or another fibre can help, while suitable recovered material can also be spun into 100% recycled wool yarn.

Pilling and Surface Wear

Recycling-related shortening can increase the challenge of controlling pilling. Short fibres have less length held within the yarn and more ends available to work towards the surface. Rubbing can then entangle exposed fibres into pills, particularly where sleeves, bags, or the body rub against the fabric.

Manufacturers can reduce this risk by selecting longer usable fibres, using enough yarn twist to hold them in place, and knitting or weaving a more closely constructed fabric. In a loose, softly spun sweater, fibres have more freedom to move under friction than in a firmer construction.

How Many Times Can Wool Be Recycled?

Wool can be recycled more than once, provided enough usable fibre remains to make the next product. The often-quoted figure of up to six recycling passes is an estimated best case for certain wool and cashmere fabrics, based on the fibre lengths expected to remain through successive cycles.

Each cycle includes making another textile. Spinning, weaving, and finishing can shorten fibres before the garment reaches a recycler again. Brushing and raising, for example, pull fibres towards the surface to create a softer, fuller finish, but can also cause breakage.

For woven fabrics already containing recycled wool, the reduction in fibre length between yarn production and finished fabric could exceed that during the next mechanical recycling step. Enough usable fibre nevertheless remained for a potential further clothing-to-clothing cycle.

As fibres shorten across these stages, the remaining material eventually becomes unsuitable for another clothing yarn. It may then move into nonwoven padding or insulation, such as the jacket filling described earlier. That filling is formed into a web, allowing shorter fibres to be used without another round of spinning.

What Makes Wool Harder to Recycle?

Even when recovered wool fibres are long enough to spin again, the other materials in the garment can restrict their next use. Mechanically opening a wool-polyester fabric generally leaves both fibres in the recovered material. Making a pure-wool yarn from that batch would require separating them, rather than simply pulling the fabric apart.

Elastane can complicate processing because its stretchy filaments are difficult to separate. Bonded layers and coatings also keep different materials attached to one another. Removing a zip or lining before recycling is relatively straightforward; separating materials already blended into a yarn or bonded across a fabric requires different treatment. A blend that improves a garment’s performance can therefore limit the options available at its next recycling stage.

What Should Brands Check When Choosing Recycled Wool?

For a brand developing recycled wool knitwear, start with the complete yarn composition and the intended garment. For example, “50% recycled wool, 30% virgin wool, 20% nylon” describes 80% total wool content, with recycled wool making up half of the blend. “100% recycled fibres” is a different claim: some of those fibres could be polyester, nylon, or another material.

Ask what documentation supports the recycled-content claim for the yarn being considered. The Recycled Claim Standard (RCS) and Global Recycled Standard (GRS) track recycled material through the supply chain; GRS also includes social, environmental, and chemical requirements for processing. Textile Exchange’s official guide explains their scope. Keep the proposed product description consistent with the composition and documentation available for that project.

Next, develop the yarn into a sample of the actual knitwear. A yarn swatch shows the material, but a finished sample lets you assess fit, weight, and skin feel in the proposed knit structure. Check how its measurements and shape change after the intended washing routine, and agree on pilling requirements and testing with the manufacturer. Confirm the approved composition, construction, measurements, and care instructions before bulk production.

GUOOU FASHION supports this process through yarn sourcing, guidance on gauge and knit construction, and custom sample development. Certified yarn options with supplier documentation can be sourced for suitable projects.

Common Questions About Recycled Wool

Can recycled wool be machine-washed?

Some recycled wool garments can be machine-washed, but mechanical recycling itself does not make wool shrink-resistant. The yarn treatment, knit structure, finishing, and other garment components all affect washing performance. For a new style, confirm the proposed care instructions through finished-sample testing. For an existing garment, follow its care label rather than assuming that a recycled blend is machine-washable.

Does recycled wool cost less than virgin wool?

It can, but there is no fixed discount. Recovered material still needs collecting, sorting, and preparation, and removing linings, fasteners, or unsuitable sections reduces the usable quantity. Mills also have to control composition and colour between batches. Compare quotations for the required blend, yarn specification, and finished knitwear rather than treating recycled content alone as a price indicator.

Are recycled wool blends biodegradable?

The wool component can still biodegrade under suitable conditions, but the rest of the blend may behave differently. Conventional polyester or nylon can remain after the wool breaks down, and finishes, coatings, and trims also affect the complete product’s end-of-life behaviour.

Our article How Biodegradable Is Wool? covers how blends, treatments, and disposal conditions affect wool’s breakdown.

Insights, Materials & Knitwear Updates

Get practical updates on knitwear design, yarns and manufacturing.

Get Quote

GUOOU Quote
#!trpst#trp-gettext data-trpgettextoriginal=7354#!trpen#Arrastrar y soltar archivos,, #!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=7355#!trpen#Elegir archivos para subir#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=757#!trpen#Puedes subir hasta 3 archivos.#!trpst#/trp-gettext#!trpen#
Upload your tech pack, sketches, reference images, or any other relevant project files.